Components you'll need:
PVC strip curtains
Mounting hardware (ordinarily bundled with the curtains)
Tape evaluate
Pencil or marker
Drill
Screws
Phase 1: Measure the doorway
Utilize a tape measure to determine the peak and width on the doorway in which you need to install the PVC strip curtains. You should definitely measure the width from the doorway at the best, middle, and base, and make use of the widest measurement.
Stage 2: Slash the PVC strips to size
Using the measurements from action 1, Slash the PVC strips to the suitable duration. Should you have a great deal of strips to chop, consider using a straight edge and a utility knife to hurry up the process.
Phase 3: Connect the mounting hardware
Employing a drill and screws, attach the mounting components to the top on the doorway. Make certain the components is level and safe.
Move 4: Dangle the PVC strips
Get started at a single facet from the doorway and hold the PVC strips from the mounting hardware. Ensure that the strips are evenly spaced and hang straight. If needed, adjust the strips by sliding them along the mounting components.
Move 5: Trim the strips
If any from the strips are far too website long, make use of a set of scissors or simply a utility knife to trim them to the right duration.
Stage 6: End the set up
At the time each of the PVC strips are hung and trimmed, be sure they are effectively aligned and change them as desired. You may also wish to incorporate a body weight bar to The underside of the curtains to keep them from swinging within the breeze.
That is it! You now have PVC strip curtains set up with your doorway.